本质安全电路用控制电缆0.5/0.75/1.0/1.5/2.5平方 计算机线缆
本质安全电路用屏蔽电缆简称本安电缆，适用于化工、石化、煤矿、电力、煤气工程等存在爆炸危险的场合以及其他防爆安全要求较高场合的集散型系统和自动化检测控制系统等电路中作信号传输线；本安电缆为低电容、低电感电缆，具有优异的屏蔽性能和抗干扰性能，其防爆安全性能要高于一般电缆。
Get A Quote
执行标准：Q/SX05-2020（等效采用英国BS5308-86）
用途：本安电缆具有有低电容和低电感，并具有极好的屏蔽性能和抗干扰性能，因而适用于有防爆要求场合的集散系统和自动化检测控制等电路中作传输线。
使用特性：
额定电压U0/U: 300/500V
最高工作温度：一般型号不超过70℃，
型号后带105的最高不超过105℃
最低环境温度：固定敷设：-40℃ 非固定敷设：-15℃
最小弯曲半径： 无铠装层电缆应不小于电缆外径的6倍
带铠装层的电缆不小于电缆外径的12倍
主要技术指标
| 性能项目 Property |
单位 Unit |
技术指标 Technical Indices |
|
| 聚乙烯绝缘 PE Insulation |
聚氯乙烯绝缘 PVC Insulation |
||
|
20℃时绝缘电阻 |
MΩ· Km | 5000 | |
| 工作电容（芯-芯）≤ Working capacitance(core-core) ≤ |
(1KHz)pF/m | 1.5mm2以下90
2.5mm2≤115 |
|
| 电容不平衡(1KHz) ≤
Capacitance unbalance (1KHz) ≤ |
(1KHz)pF/m | 1 | |
| 电感电阻比 ≤ Inductance resistance Ratio ≤ |
μH/Ω | 0.5mm2 20 | |
| 0.75mm2 25 | |||
| 1.0mm2 25 | |||
| 1.5mm2 40 | |||
| 2.5mm2 50 | |||
| 分布电感 ≤
Distributed Inductance ≤ |
μH/m | 0.7 | |
| 抗外磁场干扰（400A/m）≤
Anti outside magnetic interference（400A/m）≤ |
mV | 5 | |
| 抗静电感应（20KV）≤
Anti static induction （20KV）≤ |
mV | 80 | |
| 抗射频干扰（120dB）（在20-200MHz频带内透入≤）
Anti radio-frequency interference（120dB）（permeated with 20-200MHz band ≤） |
dB | 60 | |
| 试验电压 Test voltage |
V/1min | 1000 | |
| 阻燃性 Flame retardant property |
符合GB/T18380要求 in according to GB/T18380 |
||
导体结构及直流电阻
| 标称截面 Nom.Cross-section | 根数/直径 Number/wire Dia. mm |
20°C时直流电阻 DC.Resist.at 20℃ ≤Ω/km |
|||||
| mm | A | B | R | A、B | R | ||
| 不镀锡 | 镀锡 | 不镀锡 | 镀锡 | ||||
| 0.5 | 1/0.8 | 7/0.3 | 16/0.2 | 36.8 | 37.6 | 39.7 | 40.9 |
| 0.75 | 1/0.95 | 7/0.37 | 24/0.2 | 25.0 | 25.3 | 26.5 | 27.2 |
| 1.0 | 1/1.13 | 7/0.43 | 32/0.2 | 18.4 | 18.6 | 19.9 | 20.4 |
| 1.5 | 1/1.38 | 7/0.52 | 30/0.25 | 12.4 | 12.6 | 13.6 | 14.0 |
| 2.5 | 1/1.78 | 7/0.68 | 49/0.25 | 7.56 | 7.71 | 8.14 | 8.37 |
型号及名称
| 型号 Type |
产品名称 Names of Product |
| IA-DJYPV | 铜芯聚乙烯绝缘聚氯乙烯护套铜丝编织分屏本安用控制电缆 Control cable for intrinsically safety circuit with Cu conductor，PE insulation, PVC sheath,and Cu wire braided individual shielding |
| IA-DJYPVP | 铜芯聚乙烯绝缘聚氯乙烯护套铜丝编织分屏蔽及总屏蔽本安用控制电缆 Control cable for intrinsically safety circuit with Cu conductor，PE insulation, PVC sheath,and Cu wire braided individual and whole shielding |
| IA-DJYP2V | 铜芯聚乙烯绝缘聚氯乙烯护套铜/塑复合膜分屏蔽本安用控制电缆 Control cable for intrinsically safety circuit with Cu conductor，PE insulation, PVC sheath, Cu/polyester composite film individual shielding. |
| IA-DJYP2VP2 | 铜芯聚乙烯绝缘聚氯乙烯护套铜/塑复合膜分屏蔽及总屏蔽本安用控制电缆 Control cable for intrinsically safety circuit with Cu conductor，PE insulation, PVC shielding. |
| IA-DJYP3V | 铜芯聚乙烯绝缘聚氯乙烯护套铝/塑复合膜分屏蔽本安用控制电缆 Control cable for intrinsically safety circuit with Cu conductor，PE insulation, PVC sheath, Al/polyester composite film winding individual shielding. |
| IA-DJYP3VP3 | 铜芯聚乙烯绝缘聚氯乙烯护套铝/塑复合膜分屏蔽及总屏蔽本安用控制电缆 Control cable for intrinsically safety circuit with Cu conductor，PE insulation, PVC sheath, Al/polyester composite film winding individual and whole shielding. |
| IA-DJYPV22 | 铜芯聚乙烯绝缘聚氯乙烯护套铜丝编织分屏蔽钢带铠装本安用控制电缆 Control cable for intrinsically safety circuit with Cu conductor，PE insulation,PVC sheath, Cu-wire braided individual shielding and steel tape armoring. |
| IA-DJYPVP22 | 铜芯聚乙烯绝缘聚氯乙烯护套铜丝编织分屏蔽及总屏蔽钢带铠装本安用控制电缆 Control cable for intrinsically safety circuit with Cu conductor，PE insulation,PVC sheath, Cu-wire braided individual and whole shielding,steel tape armoring. |
| IA-DJYP2V22 | 铜芯聚乙烯绝缘聚氯乙烯护套铜/塑复合膜分屏蔽钢带铠装本安用控制电缆 Control cable for intrinsically safety circuit with Cu conductor，PE insulation, PVC sheath, Cu/polyester composite film winding individual shielding,steel tape armoring. |
| IA-DJYP2VP2-22 | 铜芯聚乙烯绝缘聚氯乙烯护套铜/塑复合膜分屏蔽及总屏蔽钢带铠装本安用控制电缆 Control cable for intrinsically safety circuit with Cu conductor，PE insulation, PVC sheath, Cu/polyester composite film winding individual and whole shielding,steel tape armoring. |
| IA-DJYP3V22 | 铜芯聚乙烯绝缘聚氯乙烯护套铝/塑复合膜分屏蔽钢带铠装本安用控制电缆 Control cable for intrinsically safety circuit with Cu conductor，PE insulation, PVC sheath, Al/polyester composite film winding individual shielding,steel tape armoring. |
| IA-DJYP3VP3-22 | 铜芯聚乙烯绝缘聚氯乙烯护套铝/塑复合膜分屏蔽及总屏蔽钢带铠装本安用控制电缆 Control cable for intrinsically safety circuit with Cu conductor，PE insulation, PVC sheath, Al/polyester composite film winding individual and whole shielding,steel tape armoring. |
| 注：1.阻燃型本安用控制电缆型号只需在表中型号前加ZR, 如ZR-IA-DJYPV
2.低烟无卤胡天的本安用控制电缆型号只需在表中型号前加WDZ, 如WDZ-IA-DJYPV 3.因低烟无卤和低烟无卤料均为阻燃料，故型号中ZR可省去。 4.耐性105℃型本安用控制电缆型号只需在表中型号后加-105，如IA-DJYPV-105;ZR-IA-DJYPV-105 Note：1.Flame-retardant type control cable for intrinsically safety circuit only need add“ZR”before type Of the table such as ZR-IA-DJYPV 2. For low-smoke,free-halogen sheath control cable for intrinsically safety circuit only need add“WDZ”before type Of the table such as WDZ-IA-DJYPV 3. Because low-smoke,low-halogen and low-smoke free-halogen compound are flame-retardant compound，“ZR”may be omitted 4. Heat-resistance 105℃ control cable for intrinsically safety circuit only need add“105℃”before type of the table，such as IA-DJYPV-105;ZR-IA-DJYPV-105 |
|
型号说明
| 项 目 Item |
代号 Symbol | 说 明 Description |
| 阻燃代号 Flame-retardant symbols |
/ ZRZAZB ZC |
非阻燃可省略 Non-flame retardant may be omitted 阻燃 Flame-retardant A级阻燃 A grade flame retardant B级阻燃 B grade flame retardant C级阻燃 C grade flame retardant |
| 系列代号 Series symbol |
IA | 本质安全电路用电缆
Cable for intrinsically safety circuit |
| 绝缘材料 Insulation materials |
Y | 聚乙烯 PE |
| 屏蔽材料 Shield materials |
P
P1 P2 P3 |
铜丝编织 Cu wire braided 镀锡铜丝编织 Tinned Cu wire braided 铜/塑复合膜 Cu/polyester composite film 铝/塑复合膜 Al/polyester composite film |
| 护套材料
Sheath materials |
Y
V
WDZ |
耐光热聚乙烯
Light resistant and heat resistant PE 聚氯乙烯 PVC 低烟无卤聚烯烃 Low-smoke, non-halogen polyolefine |
| 铠装材料
Armoring material |
22 | 钢带铠装
Steel tape armoring |
| 导体种类
Kinds of conductor |
A
B
R |
单根导体
Single-strand conductor 七股绞合导体 seven-strands twist conductor 多股软导体 Multi-strands twist conductor |
| 耐热等级
Thermal grade |
/
90
105 |
最高工作温度70℃时省略
Max. working temperature 70℃, can be omitted 最高工作温度90℃ Max. working temperature 90℃ 最局工作温度105℃ Max. working temperature 105℃ |
| 规格
Specification |
填写对数×(单元芯数×导体截面) N ×(n × s)
Fill in pairs × (cones in units × cross-section) [N ×(n × s)] 对数N:l、2、3……19、24 pairs N: 1、2、3……19/24 单元芯数n：2、3 、4 cores in units n: 2、3、4 导体截面:0.5、0.75、1.0、1,5、2.5(mm2) Conductor cross-section: 0.5、0.75、1.0、1.5、2.5(mm2) |
双星产品特点：
- 导体采用软结构时在型号后加“R”,采用7股胶合时在规格后面加“B”.
- 产品具有良好的抗电场、磁场干扰性能，并具有良好的防芯与芯之间的干扰性能。
- 在低频、高频、超高频及变频等场合下，仍具有精确地抗干扰性能。
- 阻燃型电缆、低烟无卤型电缆、耐火型电缆，需在电缆型号前加ZA、WDZ、NH即可。
相关型号推荐：电子计算机用控制电缆DJYVP2
